图片
图片
新闻详情
 
图片
文章搜索
 
 
文章正文
2-instruction demo system
作者:管理员    发布于:2009-12-15 16:21:58    文字:【】【】【

    [emdos] instructions instruction demo system

Ladies and gentlemen, dear friends and relatives:
    Moto Koji will tell you detail [emdos] instruction demo system installation, use and technical key points, welcome to my shop.

    [emdos] is the instruction demo system in z893, especially for beginners, an instruction demo software research and development.
    [1] edit users, by simply setting, will be able to z893 arithmetic instruction for real time operation, to deepen understanding of its properties.
    [2] The kernel through the timer, sampling period, will address the data in the 00-03h, real-time display in the window, the address is often used as an instruction demonstration in the destination workspace. Process is intuitive, easy to control.

    Catalog

    1 Workflow tools emdos instruction demo system
    (1) z893
    (2) the USB serial port
    (3) installation
    (4) start
    (5) the serial port
    (6) the baud rate
    (7).
    (8) data
    (9) instruction

    1.01 [RD]. read operation routines.
    1.02 [WR]. write operation routines.
    1.03 [XCH]. switching operation of routines.
    1.04 [ADD]. plus routine operation.
    1.05 [SUB]. minus operating routines.
    1.06 [CLR]. removal. The routine operation
    1.07 open [ON]. operating routines.
    1.08 [OFF].. The routine operation
    1.09 Reverse routine operation of [CPL]..
    1.10 automatic baud rate configuration ""
    1.11 "the baud rate automatically modify"
    1.12 read (high speed channel)
    1.13 read IP address pointer
    1.14 z893 shorthand lips

    1 Workflow tools emdos instruction demo system
    (1) z893
    Please connect the z893 on the serial port, and good working power supply.
    (2) the USB serial port
    If you are using USB serial port, it must install the driver must.
    (3) installation
    Through QQ, Wangwang, or u, drag and drop the file on the desktop, the software is installed.Software placed on the desktop, you see a chop like icons, engraved with two lines of characters, EM, z893. The words below the icon, indicating this is a what kind of software.
    (4) start
    Using the mouse is key, double-click the icon, the operating system kernel can correctly identify the two versions: Windows XP or windows 7, adjust the different modes of operation, the main window and the serial communication experiment system [], accurately placed right in the middle of the desktop.

    Using the mouse gently across the window, will find the two options, 2 edit editor window, 9 function keys.
    The two options are: serial port, baud rate.
Two edit editing window: left for the target workspace address; right for the target data work area.
    9 function keys: "1-9 directive" button.
    Demo version, not allowed to start multiple application windows, to manipulate with a COM port, but allowed to start multiple application windows to manipulate n com port.
    (5) the serial port
    Each power up, the initial value is displaying com?, suggest you must enter the correct serial port address.

    (6) the baud rate
    Each power up, the initial value of the display is 115200, which is the highest baud rate PC default. Baud rate adjustment range for 1200-115200. High baud rate, must be used in plc.

    (7).
    Address refers to the RAM address of the range of database, 64k. It allows two kinds of writing, the address label tick to binary, and decimal.

    (8) data
    The data refers to [data] in the instruction, the range of 0-ffh. It allows two kinds of writing, data labels on the tick to binary, and decimal.

    (9) instruction
    Using the mouse to click the "instruction" is the key, key, core sampling time, support the "combo continuous mining" function.

    1.01 [RD]. read operation routines.

    [1] The in the address edit, fill in the correct destination address.
    [2] use the mouse is kin, click "read" button, dat will immediately appear in the data in the edit window.
    [3] Double click the address of the edit, will make the address +1.
    [4] Double click the data edit, the data of +1.
    [5] The address for the binary decimal option or radio.
    [6] data radio as a binary or decimal option.
    [RD] The meaning of is: "from the address where indicated, reads 1 bytes of data. "

    1.02 [WR]. write operation routines.

    [1] The in the address edit, fill in the correct destination address.
    [2] in the data edit, fill a need for writing dat.
    [3] use the mouse is kin, click "write" function keys, DAT is immediately written to the database.
    [4] Double click the address of the edit, will make the address +1.
    [5] Double click the data edit, the data of +1.
    [6] The address for the binary decimal option or radio.
    [7] data radio as a binary or decimal option.
    [WR] The meaning of is: "from the address indicated place, write 1 bytes of data. "

    1.03 [XCH]. switching operation of routines.

    [1] The in the address edit, fill in the correct destination address.
    [2] in the data edit, fill a need for writing dat.
    [3] use the mouse is kin, click the "exchange" function keys, immediately dat data in the database and the original exchange.
    [4] Double click the address of the edit, will make the address +1.
    [5] Double click the data edit, the data of +1].
    [6] The address for the binary decimal options] or radio.
    [7] data radio as a binary or decimal option.
    [XCH] The meaning of is: "from the address where indicated, the exchange of 1 bytes of data".

    1.04 [ADD]. plus routine operation.

    [1] The in the address edit, fill in the correct destination address.
    [2] in the data edit, fill in the need to join the dat.
    [3] use the mouse is kin, click "add" function keys, immediately dat is added to the database.
    [4] Double click the address of the edit, will make the address +1.
    [5] Double click the data edit, the data of +1.
    [6] The address for the binary decimal option or radio.
    [7] data radio as a binary or decimal option.
    [ADD] The meaning of is: "from the address indicated place, add 1 bytes of data".

    1.05 [SUB]. minus operating routines.

    [1] The in the address edit, fill in the correct destination address.
    [2] in the data edit, fill a need for reduction in dat.
    [3] use the mouse is kin, click the "minus" function keys, immediately reduce into dat database.
    [4] Double click the address of the edit, will make the address +1.
    [5] Double click the data edit, the data of +1.
    [6] The address for the binary decimal option or radio.
    [7] data radio as a binary or decimal option.
    [SUB] The meaning of is: "from the address indicated place, reduced into 1 bytes of data".

    1.06 [CLR]. removal. The routine operation

    [1] The in the address edit, fill in the correct destination address.
    [2] in the data edit, fill in the required length byte cleared.
    [3] use the mouse is kin, click the "clear" function keys, immediately in the database, all of the dat is set to 00.
    [4] Double click the address of the edit, will make the address +1.
    [5] Double click the data edit, the data of +1.
    [6] The address for the binary decimal option or radio.
    [7] data radio as a binary or decimal option.
    [CLR] The meaning of is: "from the address indicating the place to start, according to the data length, continuous erase all data".

    1.07 open [ON]. operating routines.

    [1] The in the address edit, fill in the correct destination address.
    [2] in the data edit, fill a need for the 1 bit operation code.
    [3] use the mouse is kin, click "open" button, immediately in the database, bit by bit operation code is set to 1.
    [4] Double click the address of the edit, will make the address +1.
    [5] Double click the data edit, the data of +1.
    [6] The address for the binary decimal option or radio.
    [7] data radio as a binary or decimal option.
    [ON] The meaning of is: "from the address indicated place, bit by bit operation code is set to 1".

    1.08 [OFF].. The routine operation

    [1] The in the address edit, fill in the correct destination address.
    [2] in the data edit, fill a need for the 0 bit operation code.
    [3] use the mouse is kin, click "close" function keys, immediately in the database, bit by bit operation code is set to 0.
    [4] Double click the address of the edit, will make the address +1.
    [5] Double click the data edit, the data of +1.
    [6] The address for the binary decimal option or radio.
    [7] data radio as a binary or decimal option.
    [OFF] The meaning of is: "from the address indicated place, bit by bit operation code is set to 0".

    1.09 Reverse routine operation of [CPL]..

    [1] The in the address edit, fill in the correct destination address.
    [2] in the data edit, fill a need for the "anti" bit operation code.
    [3] use the mouse is kin, click "inverse" function keys, immediately in the database, the complement bitwise operation code.
    [4] Double click the address of the edit, will make the address +1.
    [5] Double click the data edit, the data of +1.
    [6] The address for the binary decimal option or radio.
    [7] data radio as a binary or decimal option.
    [CPL] The meaning of is: "from the address where indicated, the complement bitwise operation code".

    1.14 z893 shorthand lips

    Data package in front of station,
    1 2 3 exchange,
    4 plus 5 minus 6 clear,
    7 on 8 off 9 inversion.
   
    The 0 is to retain the 1 effective,
    Switch for anti bit dawn,
    Addition and subtraction overflow with page,
    Low after the former high to remember.

    Welcome to my shop, thanks again for about!

 

 
脚注信息
版权所有 Mes.电子印 1985-2019
亲:购物请点击  http://shop119129292.taobao.com   登陆我的淘宝店